Input mapping

Input mapping

Lynx allows mapping its logic inputs to physical inputs on a particular device. This ensures high modifiability of the system used HW.

Input signals mapping folder

Configurable parameter is an array of two values. First value defines ID of the device input. Second byte defines the device and input pin configuration.

tip

It is recomended to keep it in default

note

Input ID documentation Analog input ID = GPIO, AIN
Digital input ID = GDIN, DIN

Parameter	Description	Input type
in_acc	Input mapped as throttle 1 signal	Analog input ID
in_acc_2	Input mapped as throttle 2 signal	Analog input ID for 2 chanel throttle Digital input ID for endstop switch
in_cadence	Input mapped as PAS cadence	Digital input ID
in_clutch	Input mapped as clutch signal	Analog input ID
in_cruise	Input mapped as cruise activation signal	Digital input
in_dbrake	Input mapped as dynamic brake signal	Analog input ID
in_light	Input mapped as light activation signal	Digital input
in_maplock	Input mapped as second map set activation signal	Digital input
in_mapswitch	Input mapped as map change activation signal	Digital input
in_reverse	Input mapped as reverse activation signal	Digital input
in_sbrake	Input mapped as static brake activation signal	Digital input
in_speed	Input mapped as external speed sensor	Analog input ID for SX,SL,SC Digital input ID for AX, AM
in_torque	Input mapped as PAS torque	Analog input ID