Skip to main content
Version: 1.0.0

Changelog

For LYNX application

[5.0.0]​

BREAKING CHANGE​

Added​

  • beepopts - option to disable beep for reverse
    • To have the same functionality as in previous version, add to your beepopts value 256.

[4.2.2]​

Added​

  • Resolver modification for SL,SC,SX

Fixed​

  • Fix no response for changing gearthr and odothr

[4.2.0] - Unreleased (nightly)​

Added​

  • lmx msg to reset odo
  • mecatecno add OEM CAN messages
  • BMS_SUPPORT_FAHRZEUGTECHNIK (bmstype = 50)
  • For Akuenergy - new limiters for limit regen with temperature

Fixed​

  • CAN 0x5FF can_input2 fix
  • Allow combined brake with throttle and endswitch

Changed​

  • Turn on brake lights even if brake is disabled in maps

[4.1.0] - Unreleased (testing)​

Added​

  • emulator build

Changed​

  • Updated BEST module - change SOC to represent energy capacity rather than charge capacity

Fixed​

  • driver, yos submodule update (msgpool fix, extended can ID fix)

[4.0.8]​

BREAKING CHANGE​

  • CSC module: Now in CSC module is LPF at the block beggining. In previous version was LPF at the end of the block.
  • SC controller - now is build with LITE mode (remove some comments to save flash memory)

Changed​

  • SL increaed max current 6
  • modLAND - change rights to odothr and gearthr

Added​

  • New params for mecatecno to maps

Fixed​

  • Disable map change from IOT when reverse/boost is active

[3.9.0]​

Added​

  • ABZ Encoder support
  • drvopts - auto-brake feature

Fixed​

  • obd2 GET PID speed

[3.8.0]​

Added​

  • LMX Limp mode

[3.7.0]​

Added​

  • mapopts 8 - count restricted maps for china display from 0
  • support for Greenway/SOL BMS

Changed​

  • SL controller - add revmap
  • If braking using PAS is disabled, do not allow negative cadence
  • If reserve level map condition is met at start, do ignore it and only signalize it on display

Fixed​

  • tachopas_ext Fix reading

[3.6.0]​

Added​

  • map/options
    • disable static/dynamic brake in map completely (Rider can brake during acceleration)
    • disable cruise in map
  • Akuenergy BMS - limit current at high humidity

Changed​

Removed​

Fixed​

  • tachospd, pas - fix odo for "ppr" > 1

[3.5.0-7]​

Added​

  • Welding mode
  • OBD2 P0A9B - BMS temperature sensor error

Changed​

Removed​

Fixed​

  • Driver update
  • Jikong BMS - SOC

[3.4.2-4]​

Added​

  • Is mill on to 0x618 and for DKD display

Changed​

Removed​

Fixed​

  • Maplut table allow negative value

[3.4.1]​

Added​

  • Akuenergy BMS support
  • WSLED mode 70 - SOC + maps on one LED

Changed​

Removed​

Fixed​

[3.3.0]​

Added​

Changed​

  • Cruise reset from throttle now reset after throttle is released and than activated again
    • Cruise refactored

Removed​

Fixed​

  • Bafang display can enable Cruise

[3.2.0]​

Added​

  • Cruise feature enabled
  • Map change turn off cruise

Changed​

  • CAN MSG 0x618- current scale changed to 0-650A
  • BMS protocol - New BMS states

Removed​

Fixed​

[3.1.0]​

Added​

  • Add OBD support (on request)

Changed​

  • Use new refactored driver
    • permanents changed

Removed​

Fixed​

[Unreleased]​

[3.0.0]​

  • Support for new siliXcon display

Added​

  • new LYNX MODEs (for new display)
  • initmap = -1 -> restore last map - This add permanent
  • auto brake functionality
  • Modifications:
    • Measure battery temp on GPIO
    • Enable/disable reverse map
    • comm iot
    • Lock

Changed​

  • Some parts refactored. Some LYNX functionality can be activated or removed from build to save memory space in esc3 family.
  • LOCK MODE removed from standard generic MOD

Removed​

Fixed​

Braking changes (3.0.0)​

  • ODO and TRIP in msg 0x620 are now in km
  • Add permanents

[2.4.0] - 2021-05-22​

Added​

Changed​

  • Code refactor, new FW structure

Removed​

Fixed​

[2.3.0] - 2021-05-05​

Added​

  • usrcalib
  • new user - "dealer"

Changed​

  • Start with semantic versioning
  • service user - can change all parameters
  • dealer user - can also change usrcalib and set "trip" and "odo"
  • passlvl is now multipliing cadence before cscpas

Removed​

Fixed​

  • User premission

[2.2b] - 2021-04-29​

Added​

Changed​

Removed​

Fixed​

  • reserve level function was not working properly, now it is tested

[2.2a] - 2021-04-22​

Added​

Changed​

  • Change access level for permanents - "odo" and "trip"
    • User "service" can change them

Removed​

Fixed​

[2.1a] - 2021-03-22​

Added​

  • fuel reserve functionality
    • reservelevel param
    • reservemaps param
  • Use arming.c block

Changed​

Removed​

Fixed​

  • Warning free

[2.0a] - 2021-02-08​

Added​

Changed​

  • control_on_msg - added rxmode
    • compatibility with esc5

Removed​

Fixed​

[1.4a] - 2020-12-28​

Added​

  • [modBMS] new msg from BMS to setup ibpos, ibneg, ubmin, ubmax according to connected battery

Changed​

Removed​

Fixed​

[1.3d] - 2020-12-22​

Added​

Changed​

Removed​

Fixed​

  • restricted maps can be activated

[1.3c] - 2020-12-21​

Added​

Changed​

Removed​

Fixed​

  • syncmode SLAVE - fix mapchange using lpf/ramp
  • add mising header file "best.h

[1.3b] - 2020-12-3​

Added​

Changed​

Removed​

Fixed​

  • fix syncmode

[1.3a] - 2020-10-13​

Added​

Changed​

  • Reorganize PAS block
    • add human_watts functionality

Removed​

Fixed​

[1.2a] - 2020-09-16​

Added​

  • [MAPS] param pastrq
  • [PAS] cscpastorque
  • support for SL, SC light
  • MAX_MAP_COUNT now define number of registered maps
  • LITE mod:
    • remove brake statuses
    • remove PAS and torque functionality
    • save FLASH memory in SL

Changed​

  • default option for in_light, now = 0
  • best reset time is no 500ms
  • default option for restmapcnt = 0
  • all params in map0 are 0

Removed​

Fixed​

  • odo and trip are incrementing
  • Display speed

[1.1] - 2020-07-23​

Added​

Changed​

  • param "syncmode" no have different meaning (multi-controller setup <0:disabled>, <1:master>, <2:slave>)

Removed​

Fixed​

  • Reverse map is working

[1.0]​

Initial version of LYNX