Driver permanents
Due to less resources available in the esc3 and esc4 family of the controllers, some of the permanents are only present in esc5 family.
Permanents
single_run/maxcurrent [A]
The maximal measured battery current during the current run of the controller.
single_run/maxvoltage [A]
The maximal measured battery voltage during the current run of the controller.
single_run/maxtemp [°C]
The maximal measured controller temperature during the current run of the controller.
single_run/mintemp [°C]
The minimal measured controller temperature during the current run of the controller.
single_run/minmotortemp [ohm]
The minimal measured motor temperature sensor resistance during current run of the controller.
Can be reset by an user with rights level greater or equal to 2
single_run/maxmotortemp [ohm]
The maximal measured motor temperature sensor resistance during current run of the controller.
Can be reset by an user with rights level greater or equal to 2
single_run/maxerpm [1/min]
The maximal measured motor speed during current run of the controller.
single_run/enegy [J]
The accumulated absolute value of the energy that went trough the controller during the current run. Regeneration will also increase the energy.
single_run/cap [mAh]
The accumulated capacity that went trough the controller during the current run. Regeneration will decrease the capacity.
total/maxcurrent [A]
The maximal measured battery current during the controller's lifetime.
total/maxvoltage [A]
The maximal measured battery voltage during the controller's lifetime.
total/maxtemp [°C]
The maximal measured controller temperature during the controller's lifetime.
total/mintemp [°C]
The minimal measured controller temperature during the controller's lifetime.
total/minmotortemp [ohm]
The minimal motor temperature sensor resistance during the controller's lifetime.
Can be reset by user with rights level greater or equal to 2
total/maxmotortemp [ohm]
The maximal measured motor temperature sensor resistance during the controller's lifetime.
Can be reset by an user with rights level greater or equal to 2
total/enegy [J]
The accumulated absolute value of the energy that went trough controller during the controller's lifetime. Regeneration will also increase the energy.
err_counter [-]
Number of the errors (driver/error), that occured on the controller.
The following error codes are not counted:
- Low voltage, caused by regular controller shutdown
- Service errors (identrun, reinit,...)